Hello, What’s going on? Do you have Tao Tronics Soundbar and want to program it using Universal Remote Codes? Do you want to know how to Program Tao Tronics Soundbar with Universal Remote? If yes, then we welcome you on this page.
We have listed below all the 3, 4, and 5 Digit Tao Tronics Soundbar Universal Remote Codes and also the program instructions for your device.
Tao Tronics Soundbar Universal Remote Codes
You can program any of the universal remotes with your soundbar, but on this web page, we will provide you with Tao Tronics Soundbar Universal Remote Codes only. If you have another brand of soundbar you can check the link HERE.
Tao Tronics Soundbar Universal Remote Codes List
| 0XD9 | 0X14 |
| 1999 |
How To Program Tao Tronics Soundbar with Universal Remote?
Below are the two methods to program your universal remote with your Soundbar, follow these simple steps and program your device with the universal remote.
How to Program Tao Tronics Soundbar Universal Remote Without Codes
- First, turn On your Soundbar.
- Turn On the remote and tap the device button (TV, DVD, Soundbar, etc) for 3 seconds.
- Now point the remote to the device and press CH+ and CH- buttons continuously until your device turns Off.
- Verify the code by pressing the Power button. Your device should turn on.
- Now test your device and tap the device button to save the code.
How to Program Tao Tronics Soundbar Universal Remote With Manual Method
- First, turn the Tao Tronics Soundbar on.
- Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
- Press and hold the SETUP button on your universal remote until the red light flashes.
- Now enter the Tao Tronics Soundbar Universal Remote Code for that device. After entering the code red light will turn off.
- Once you have entered the code, now point the remote to the device and try testing it by using different buttons.
If the above-mentioned methods do not work for your device, try the Bluetooth connection. Below is the process to connect Tao Tronics Soundbar with a Bluetooth connection.
How To Connect TaoTronics Soundbar With Bluetooth Connection?
- First, you need to switch on the soundbar.
- Then switch to the Bluetooth mode.
- Make sure to activate Bluetooth on your device and also search for Bluetooth.
- For Android Devices: Setting > Bluetooth > ON > Scan for devices.
- For IOS: Setting > General > Bluetooth > ON.
- Now search for the TaoTronics Soundbar and tap to connect.
- You’ll hear a beep sound which means your device is successfully connected.
