Sylvania DVD Player Universal Remote Codes

Do you have the Sylvania DVD Player? and are you trying to use your favorite remote control to operate your DVD player? If so, you need the universal remote codes. Actually, any form of the universal remote control may be used to run this; all you need to do is find the required and functional codes, after which you can easily program the remotes to communicate with one another using the method listed below.

Check the codes, and if necessary, follow the instructions below. If necessary, set up your universal remote control to work with a Sylvania DVD player. Use the remote controls listed here.

Sylvania DVD Player Universal Remote 4 Digit Codes

• 2213
• 2260
• 2321
• 2327
• 2408
• 2002
• 2064
• 2078
• 2092
• 2194

GE Universal Remote Codes For Sylvania DVD Player

• 0456
• 0458

Read Also: Magnavox DVD Player Universal Remote Codes

How to Program Sylvania DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the instructions below:

• Turn on the smart device you want to use the universal remote to control, such as the TV.
• To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
• Use the remote to choose the “CH+” and “CH-“ switches.
• On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
• Click the “power” key to confirm the code. It should start up. If it does, check a different channel to ensure the remote is programmed correctly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program Sylvania DVD Universal Remote With Manual Method

The universal remote may be readily programmed using the keycode, which also helps to identify the make and model of your equipment.

• You must first “Turn The Device On.”
• On your “Sylvania DVD universal remote,” choose “TV.”
• In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
• At last, key in the “Keycode”  which you collected from the programming manual (Instructions Booklet)
• Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
• When the screen switches, you can release the “Power Button.”

That’s all there is to it; your TV should now operate perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

How to Program Sylvania DVD Universal Remote With Code Search

You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

• “Turn The Device On” 
• Hold down the “Setup” button for a moment.
• Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room operations once you have completed the above steps.

Conclusion

Please provide us with your feedback on this topic. Have you successfully completed the setup procedure by entering the correct code? Please let us know which codes have worked with which devices. Keep coming back to our website to learn more about additional codes if you have more universal remote controls that need to be programmed.

FAQs