Supersonic DVD Universal Remote Codes


Hey, how are you doing? Are you looking for Supersonic DVD Universal Remote Codes? Do you want to know how to program GE universal remote for your device? No need to worry about it! Fortunately, you are at the right place.

If you want to program your Supersonic DVD player to work with your chosen universal remote control, then look at the programming methods with working Supersonic DVD universal remote codes that are listed below.

This Super Sonic DVD universal remote has designed for 6 different kinds of components by simply using a single device including:

1) It can compatible with TV’s, Cable, Satellite, DVD, Audio, and VCR

 2) It has an automatic code search

3) Also large keys for ease of use

 4) Info, Menu, Input, Clear Preview Chapter, and Next Chapter Keys

5) Advanced DVD Functions

6) Battery Type: 2 x AA ( not included)

Supersonic DVD Universal Remote Codes

You want to use a universal remote to control your Supersonic TV. In such a situation, you must program your chosen universal remote control with one of the following codes. Following the code, lists are step-by-step instructions for programming your universal remote using the given codes as well as two alternative strategies in case the first method did not work. Try a different code if the first one does not seem to work.

Supersonic DVD Universal Remote 4 Digit Codes

  • 0805
  • 0264
  • 0698
  • 0208
  • 0556
  • 0096

Supersonic DVD Universal Remote Codes For One For All

  • 0208
  • 0096

Read Also: Sansui DVD Player Universal Remote Codes

How to Program Supersonic DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to determine the right remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-” switches.
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.
  • To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program Supersonic DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also serves to identify the make and model of your device.

  • You must first “Turn The Device On.”
  • On your “Supersonic DVD universal remote,” choose “TV.”
  • In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches, you can release the “Power Button.”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • First of all “Turn The Device On”
  • Hold down the “Setup” button for a moment.  
  • Enter the “9-9-1” (three-digit) code
  • As soon as the device, in this case, your TV, “Turns Off,” press and hold the “Power Button” on the remote control.
  • Finding your key code may require some time using the above approach, but it is very important. Your remote should function properly for all operations once you have completed the above steps.
Supersonic DVD Universal Remote Codes


In conclusion, if you require our assistance with any universal remote codes, get in touch with us, and we’ll provide you with better advice and try to help you out as quickly as we can. Visit us frequently to acquire updated universal remote codes.


How do you program a universal remote to a DVD?

How to use a universal remote with a television, DVD player, or Blu-ray player Activate the device. Press the appropriate device button on the remote control, either “TV,” “DVD,” or “AUX.” Hold down the “RCU SETUP” button while waiting for the device key to flash twice.

Why won’t my DVD respond to the remote?

The remote control is broken or unclean.
You can attempt a remote reset. To drain the remote of power, remove the batteries and press and hold one or more buttons for a while. If the remote control on your Sony or Samsung DVD player isn’t working, try installing fresh batteries.


Please enter your comment!
Please enter your name here