Hello there. You are welcome on this page. Let me tell you that we are providing you with all the Sanyo Soundbar Universal Remote Codes on this web page. So if you are trying to find out universal remote codes for Sanyo Soundbar, you are at the right place.
We have also mentioned methods to program Sanyo Soundbar with Universal Remote. So, choose the code for your device and try programming it by using the below methods. If one method does not work, try another.
Sanyo Soundbar Universal Remote Codes
We are providing codes for Sanyo Soundbar on this web page, but if you have another brand of device or another brand of universal remote, you can check the link HERE.
Sanyo Soundbar Universal Remote Codes List
Sanyo Soundbar Universal Remote 3 Digit Codes
| 590 | 611 |
| 627 | 661 |
| 683 |
Sanyo Soundbar Universal Remote 4 Digit Codes
| 0157 | 1156 |
| 1166 | 1176 |
Sanyo Soundbar Universal Remote 5 Digit Codes
| 20047 | 10154 |
| 10159 | 10051 |
| 10250 | 20035 |
| 30189 | 30531 |
| 20081 | 21593 |
| 20593 | 20000 |
| 20039 | 20149 |
| 21781 |
How To Program Sanyo Soundbar with Universal Remote?
Below are the two methods to program your universal remote with your Soundbar, follow these simple steps and program your device with the universal remote.
How to Program Sanyo Soundbar Universal Remote Without Codes
- First, turn On your Soundbar.
- Turn On the remote and tap the device button (TV, DVD, Soundbar, etc) for 3 seconds.
- Now point the remote to the device and press CH+ and CH- buttons continuously until your device turns Off.
- Verify the code by pressing the Power button. Your device should turn on.
- Now test your device by and tap the device button to save the code.
How to Program Sanyo Soundbar Universal Remote With Manual Method
- First, turn the Sanyo Soundbar on.
- Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
- Press and hold the SETUP button on your universal remote until the red light flashes.
- Now enter the Sanyo Soundbar Universal Remote Code for that device. After entering the code red light will turn off.
- Once you have entered the code, now point the remote to the device and try testing it by using different buttons.
