Pioneer DVD Player Universal Remote Codes


Do you own a Pioneer DVD player? This is the ideal article to link your DVD player with the remote control if you want to program it with your chosen universal remote control. So let’s explore the process as well as the programs. Even after following the steps below, if you face any problems, please contact us so we can provide a solution. Why wait to read the article below? We have already included all of the universal remote codes for Pioneer DVD players.

Pioneer DVD Player Universal Remote Codes List

PIONEER is one of the popular DVD brands in the market.A Pioneer DVD typically includes a remote control. However, you can program the DVD using a universal remote if for any reason you lose your Pioneer DVD remote control or it becomes damaged.

Before you can use the code, you must understand how to set up your universal remote control to function with your PIONEER DVD. The instructions for setting up a universal remote control to operate a Pioneer DVD are also provided below.

  • 0571
  • 0631
  • 1965
  • 2008
  • 2021
  • 2160
  • 2164
  • 2191
  • 2224
  • 2223
  • 2310
  • 2337
  • 2400
  • 0632
  • 0638
  • 0525
  • 1902
  • 1900

How to Program Pioneer DVD Universal Remote With Auto-Search

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-“ switches.
  • On/off indications are displayed on the remote. Press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

Read Also: jvc dvd player universal remote codes

How to Program Pioneer DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your device.

  • You must “Turn The Device On”.
  • On your Pioneer DVD universal remote, press “TV.”
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button”.

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

How to Program Pioneer DVD Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take some more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed the above steps.


Even though we have listed all of the Pioneer DVD Player universal remote codes in this blog post, if you find any errors or think we have left out any, please leave a comment and we will fix the problem as well as add the missing Pioneer DVD Player remote codes.


Is there a Pioneer DVD player remote control app?

Through your home network, you may use the Pioneer ControlApp application to control a number of Pioneer products with your iPhone, iPod touch, or Android device.

How do I find the code for my universal remote?

Look inside the battery compartment under the batteries or on the underside of the compartment cover to find the model and code list version.
Replace the batteries and/or compartment lid after determining the code list version (CL3, CL4, CL5, or CL6) and making a note of it.



Please enter your comment!
Please enter your name here