Hey, What’s going on? Have you just bought a universal remote for your Logik soundbar? Do you want to program Logik Soundbar with Universal Remote? Do you want to know the Logik Soundbar Universal Remote Codes? If your answer to all the questions is yes, then fortunately you are at the right place.
We have listed all the Codes For Logik Soundbar Universal Remote and also the methods to program your Logik Soundbar. Don’t worry about the codes, these are all tested by our team thoroughly. So, choose the code for your device and program it using the methods below.
Logik Soundbar Universal Remote Codes
As I have already mentioned that you will get all the codes for Logik Soundbar here. But if you have another brand of soundbar and you want to program it with your universal remote you can check the list HERE.
Logik Soundbar Universal Remote Codes List
| 0596 | 0016 |
| 2135 | 0060 |
| 2107 | 1107 |
| 0011 | 1065 |
| 0908 | 1245 |
| 0726 | 0399 |
| 0039 |
Logik Soundbar Universal Remote 3 Digit Codes
- 016
- 072
How To Program Logik Soundbar with Universal Remote?
Below are the two methods to program your universal remote with your Soundbar, follow these simple steps and program your device with the universal remote.
How to Program Logik Soundbar Universal Remote Without Codes
- First, turn On your soundbar.
- Turn On the remote and tap the device button (TV, DVD, Soundbar, etc) for 3 seconds.
- Now point the remote to the device and press CH+ and CH- buttons continuously until your device turns Off.
- Verify the code by pressing the Power button. Your device should turn on.
- Now test your and tap the device button to save the code.
How to Program Logik Soundbar Universal Remote With Manual Method
- First, turn the Logik Soundbar on.
- Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
- Press and hold the SETUP button on your universal remote until the red light flashes.
- Now enter the Logik Soundbar Universal Remote Code for that device. After entering the code red light will turn off.
- Once you have entered the code, now point the remote to the device and try testing it by using different buttons.
