LG DVD Player Universal Remote Codes


Hey! How are you doing? Are you an LG DVD player user? And would you like this DVD player to be connected with your favorite universal remote control? So why have we waited so long to discuss some of the key programming techniques along with these LG DVD Player Remote Codes? The codes below also work with RCA, Philips, GE, ONN, and One For All Remotes. So, verify that your code is connected before programming using the method identifies below. So let’s get started.

LG DVD Player Universal Remote Codes

As there are many brands of remotes like LG, here you will only get the LG DVD Player Universal Remote Codes list. If you want to operate your devices using another Universal Remote, then you can check the list of Universal Remotes.

LG DVD Player Universal Remote 4 Digit Codes

You need the LG DVD Player Remote Codes to program a universal remote for your LG DVD player. The codes below are described in this post. The list below includes many remote controls for LG DVD players. For each device, more than one code has been offered. So kindly try another code if one of the codes doesn’t work. The code usually consists of 4 digits.

  • 0591
  • 0741
  • 0571
  • 0801
  • 1906
  • 0869
  • 1983
  • 2039
  • 2270
  • 2297
  • 2303
  • 2339
  • 2352
  • 2363
  • 2368
  • 2371
  • 2418

ONN Universal Remote Codes For LG DVD Player

  • 2635
  • 4285
  • 3915
  • 2335
  • 2555
  • 2565
  • 0205
  • 0635
  • 1565
  • 2925
  • 3785
  • 3885

GE Universal Remote Codes For LG DVD Player

  • 0405
  • 0972
  • 0907

Magnavox Universal Remote Codes For LG DVD Player

  • 0142
  • 0898
  • 0392

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the directions below:

  • “Turn On” the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds.
  • The device is ready to program, according to the LED light
  • Use the remote to choose the “CH+” and “CH-“ switches.
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key till the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, try changing the channel to verify that the remote is programmed correctly.
  • To save the code, press the “device” button now. The device’s LED will blink twice to verify the code that was stored.

LG DVD Universal Remote With Manual Method

  • You must first “Turn The Device On.”
  • On your “LG DVD universal remote,” choose “TV.”
  • To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • Finally, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button.”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try again with a new code from the same part of the reference table.

You can put your universal remote to search mode and search for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the manual.

  • First of all “Turn The Device On”
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code 
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

Finding your key code may require some extra effort using the above approach, but it is very important. Once you have completed the above procedure your remote should be working for all the functions.


I hope that the codes and instructions I provided can help you program your LG DVD Player Universal Remote Codes. Remember that if the LG DVD Player Universal Remote Codes provided do not work for your specific model, you may need to consult the user manual for your remote or contact the manufacturer for assistance.


Does LG support universal remotes?

The global LG smart tv remote control has hotkeys for Netflix, Prime Video, and movies, and it works with the LG magic TV remote control.

Why is my LG universal remote not working?

Press and hold the “Home” and “Back” buttons on your LG TV remote control at the same time to reset it. Hold them for approximately 5 seconds, or until the power button on the remote starts to flicker. Following that, re-pair the remote with your TV.


Please enter your comment!
Please enter your name here