Inteset Universal Remote Codes For All Devices

0
560

Hey, What’s going on? Are you looking for Inteset Universal Remote Codes? Do you want to know how to program the Inteset universal remote for your device? No need to worry about it! Fortunately, you are at the right place. On this web page, we have collected all the 3 Digit, 4 Digit, and 5 Digit codes for all your home devices like TVs, Blu-Ray players, Soundbars, DVD players, and many more.

Below we have listed all the Inteset Universal Remote Control Codes for All Devices. All the provided codes are fully tested by our technical team and we are sure about them. So, just go and find the code for your device from the list below.

Inteset Universal Remote Codes For All Devices

As there are many brands of remotes like Inteset, here you will only get the Inteset Remote Codes List. If you want to operate your devices using another Universal Remote, then you can check the list HERE.

Inteset Universal Remote Codes List

Brand NameRemote Codes
Hisense00551
Haier00639
Insignia00545
LG00683, 00516
JVC29247
Magnavox61553
Philips63428
Panasonic47149
Sanyo00279
Samsung00521
Sharp43500
Sony14917
TCL00492, 00629
Toshiba52389
Vizio00344

How To Program Inteset Universal Remote with my Device?

Below we have two methods to program Inteset Remote with any device. Follow the steps to program your Inteset Universal remote to your device and control them with all ease.

Programming Inteset Universal Remote Without Code Method

  • Turn on your device( e.g. Tv, DVD player, VCR, etc.) that you want to program.
  • Press the device button and then press the OK/SEL buttons together.
  • Keep pressing them until a flashlight glows, it means your device is ready to be programmed.
  • Now point your remote to the device and keep pressing CH+ and CH- buttons until your device turns off.
  • Now test your device and then finally save the code.

Programming Inteset Universal Remote With Code Method

  • Turn on your device( e.g. Tv, DVD player, VCR, etc.) that you want to program.
  • Press the device button and then press the OK/SEL buttons together.
  • Keep pressing them until a flashlight glows, it means your device is ready to be programmed.
  • Now point your remote towards your device and enter 3 Digit code for your brand of device.
  • If the code is correct, your device will turn OFF. Now press the Power Button to turn ON the device and check by using VOL+ or VOL- buttons.
  • If still your device is not working then retry the procedure with another code.
  • If your device is working properly, it means you have successfully programmed it.
  • Now hit the Component button to save the code.

These are the simple methods to program your Inteset Universal Remote Control with your device. If your remote is not programming with one method, try another one.

All Other Universal Remote Codes

LEAVE A REPLY

Please enter your comment!
Please enter your name here