Hyundai DVD Player Universal Remote Codes


 Do you want to know how to program the Hyundai DVD Player Universal Remote Codes for your device? No need to worry about it! Fortunately, you are in the right place. 

In this blog post we are gonna mention all types of Hyundai DVD player remote codes if you want to try any of the Hyundai DVD player remote codes on this universal remote control then you can perfectly do it now.

If you want to try any of the Hyundai DVD player remote codes mentioned in this blog article on your universal remote control, you may do so right now. Because we have a large number of codes, you may try them by following the simple instructions below.  Check out the multiple methods, including automatic, manual, and code searches, and you can even find the codes as well.

Hyundai DVD Player Remote Control 4 Digit Codes

  • 0766
  • 0783
  • 0850

Hyundai DVD Player Remote Control 3 Digit Codes

  • 102
  • 709
  • 105
  • 531

How to Program Hyundai DVD Universal Remote Without Codes

Hyundai DVD Player Universal Remote Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the directions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches. 
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.
  • To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

Read Also: Sansui DVD Player Universal Remote Codes

How to Program Hyundai DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also serves to identify the make and model of your device.

  • You must first “Turn The Device On.”
  • On your Hyundai DVD universal remote, choose “TV.”
  • In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off you can release the “Power Button.”

Note: That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • First of all “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter  the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may require some extra effort using the above method, but it is very important. Your remote should function properly for all functions once you have completed the above steps

Note: that not all codes work with all models of Hyundai DVD players. If the codes above do not work, you may need to consult your remote control manual or try searching online for additional codes that are specific to your DVD player model.


In conclusion, if you require our assistance with any universal remote codes, get in touch with us, and we’ll provide you with better advice and try to help you out as quickly as we can. Visit us frequently to acquire updated universal remote codes.


How to program a universal remote to a DVD player without codes?

You must follow these steps to program your universal remote without a code: Your universal remote’s SET and Zero (0) buttons must be depressed simultaneously four times. This important phase is where most individuals fall short. The LED light indication will then gradually begin to turn on and is typically red.

Can I use any universal remote?

Your universal remote should function with your smart TV as long as it contains an infrared sensor (or whatever connection type your remote uses, like Bluetooth or Wi-Fi). Yet, some universal remotes are limited to operating the power, volume, and channel up/down buttons on your TV.


Please enter your comment!
Please enter your name here