Hey, How are you? Many universal codes are offered on multiple websites. But if you really want your universal remote’s exact working codes. The correct list of Huayu DVD universal remote control codes is then provided below, making it simple for you to use them. Make sure you change your standard remote control to the Huayu DVD universal remote. Only then may universal codes be used; otherwise, you must create a number of complications.
Huayu DVD Universal Remote Codes List
- 0026
- 0028
- 0022
How to Program Huayu Universal Remote Without Codes
All universal remote control codes are scanned in the remote during the auto-search procedure. In order to program the controller, it scans each code one at a time to find out which remote code is the right one to use with your remote. The steps listed below should be followed:
- Turn on the smart device you want to control with the universal remote, such as a TV.
- Press the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds to “turn on” the device using the remote. The LED light shows that the device is ready for programming.
- Use the remote to choose the “CH+” and “CH-“ switches.
- On/off indications will show up on the remote. Press the “up” or “down” key repeatedly until the device turns off.
- By pressing the “power” key, confirm the code. The system should start up. If it does, check a different channel to make sure the remote is programmed properly.
- To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.
Read Also: Daewoo DVD Player Universal Remote Codes
How to Program Huayu Universal Remote With Manual Method
The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your equipment.
- You must “Turn The Device On”.
- Press the “TV” button on your “Huayu universal remote”.
- As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
- Finally, enter the “Keycode” that you received from the Instructions Booklet for programming.
- Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
- When the screen switches off, you can release of the “Power Button”.
That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.
Conclusion
Have you tried any of the above-mentioned codes on your device? We’re happy to hear your opinions and support other readers going through similar things. But, if you are experiencing trouble configuring your remote using one of the above codes, we are here to help. Just enter your feedback in the space provided here.
FAQs
How do I know if the Huayu Universal Remote Code I am using is correct?
Once the code has been entered into the remote control, test it by pressing the power button. The code is valid if a device turns on or off. Try a different code until you find one that works if the first one doesn’t.
Where can I find Huayu Universal Remote Codes?
The user manual that comes with your remote control contains Huayu Universal Remote Codes. If you misplaced the manual, you may also look up the codes online at Huayu or other independent sources
