Hey, What’s going on? Have you recently purchased the Innovage Jumbo Universal Remote Control? If you have, then you are in luck! This powerful remote control comes with easy to follow step-by-step instructions on how to program the remote for your television, DVD player, or digital audio receiver. Read this article for further instruction on this process.
The Innovage Jumbo Universal Remote Control is one of the most advanced remotes that can be programmed to control multiple devices from one remote. The Innovage Jumbo Universal Remote Control has a simple set-up wizard that will make it easy for you to program your remote. Follow the steps below and you will be able to program your Remote Control in no time!
How To Program The Innovage Jumbo Universal Remote Control- 3 Easy Methods
There are three ways that you can program your Innovate Jumbo Universal Remote Control. The first method is by using the code search function. The second method is by manually inputting the code for your specific device. The third method is by using the learn function.
Programming Innovage Jumbo Remote BY Auto-Search Method
To use the code search function, follow these steps:
- Press and hold the “Setup” button on your remote control until the red light flashes twice.
- Enter the code 9-9-1 on your remote control. The red light will flash twice again.
- Press and release the “Power” button on your remote control.
- Point the remote control at your TV and press and hold down the “CH+” button until your TV turns off. Once your TV turns off, release the “CH+” button and press it again four times quickly. If done correctly, the red light on your remote control will blink four times slowly.
- To save the code that was just learned, press and release the “Setup” button on your remote control.
How to Program Innovage Jumbo Remote by Using Manual Method
By using the Innovage Jumbo Remote Code you can easily program your Universal remote. Here are the steps to manually program the Innovage Jumbo Universal Remote Control.
- First, turn the device on.
- Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
- Press and hold the SETUP button on your universal remote until the red light flashes.
- Now enter the Innovage Jumbo Universal Remote Code for that device. After entering the code red light will turn off.
- Once you have entered the code, now point the remote to the device and try testing it by using different buttons.
That’s it. Your Universal remote is successfully programmed with your device. If not, try repeating the procedure by using different codes from the same reference table.
Read Also: Jumbo Universal Remote Codes For All Devices
How To Program Innovage Jumbo Universal Remote Using The Code Search Method
- First, turn your device (you want to control it) on.
- Press and hold the device button until the red light turns on. Then release.
- Point your Innovage Jumbo Remote to the device and press the CH+ and CH- buttons. Press them continuously until the device turns OFF. Now remote is automatically searching for code.
- Press the POWER button to verify the Innovage Jumbo code. If your device is turned ON, your device is successfully completed programming.
Retrieving the Code for your Device:
In order to program your Innovate Jumbo Universal Remote Control, you will need to retrieve the code for your device. You can check the remote code for your device by using owner’s manual. If you don’t have the manual, then don’t worry at all. We have all the codes listed for you.
Our website has a comprehensive list of codes for different types of TVs. You can get the list of codes for Hisense tv universal remote Here. Once you find the code for your device, you will need to program it into your universal remote. For this, follow the easy steps mentioned above.
Once you have the code, programming your remote is a breeze! Just follow the instructions that came with your remote control and you’ll have it programmed in no time.
Conclusion
If you’ve followed the steps in this article, you should now know how to program your Innovage Jumbo Universal Remote Control. This remote is a great option for those who want a simple way to control all their devices in one place. With its large buttons and easy-to-use interface, the Innovage Jumbo is perfect for anyone looking for a user-friendly universal remote control. Give it a try and see how it works for you!
