How To Program RCA Universal Remote Without Code


Hey there! Hope you are doing well. So do you want to Program RCA Universal Remote Without Code? Do you want to connect it to your home entertainment system so you can turn on and off components of your system with ease? Great! Now all that’s left is programming the remote.

Programming a RCA universal remote is simple enough, but sometimes the keys to programming your RCA universal remote can get lost or forgotten. If you are in need of a code that might have gotten damp, sticky, or just misplaced, then this article will help!

How To Program RCA Universal Remote Without Code
How To Program RCA Universal Remote Without Code

Programming RCA remotes without codes (Auto-Search Method)

If you don’t have a code list or can’t find the right code using the search function, you can try programming the remote manually. The auto-search method is the easiest way to Program RCA Universal Remote Without Code. To use this method:

  1. First, turn on the device you want to control with the remote.
  2. Then, press and hold down the “Setup” button on the remote until the red light blinks twice.
  3. Next, enter the code 9-9-1. The red light will blink twice again to indicate that you are in manual programming mode.
  4. Now, press and release the button on the remote that corresponds to the device you’re trying to control—for example, “TV” for a television or “DVD” for a DVD player. The red light should blink once.
  5. Finally, point the remote at your device and press and hold down the “Power” button until your device turns off (this may take a few seconds). If successful, the red light will blink twice again.
  6. You can now use your RCA universal remote to control your devices without codes!

Method To Program RCA Universal Remote (With Code)

The Direct Code Entry method is a bit more complicated than the Auto Code Search method. To use this method, you’ll need to know the code for your TV or other device. Once you have the code, follow the steps below:

  • First, turn your device on.
  • Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
  • Press and hold the SETUP button on your universal remote until the red light flashes.
  • Now enter the RCA Universal Remote Code for that device. After entering the code red light will turn off.
  • Once you have entered the code, now point the remote to the device and try testing it by using different buttons.

How To Find The Code?

There are a few different ways that you can go about getting the code for your RCA universal remote. One way is to check the instruction manual that came with your remote. This should have a list of codes that you can use for various devices. If you don’t have the manual, you can try doing a search online.

We also have a solution to this problem. To get the RCA universal remote code you can simply visit the link HERE. All the codes for different brands of devices are given there. And don’t worry all the codes are fully tested by our technical team. You just go and get the code according to your brand of device.

Once you have the code, you will need to program it into your remote. So, simply follow the above instructions and program your remote in no time.

Additional Programming Features

In addition to the programming methods described above, there are a few other features that can make programming your RCA universal remote even easier.

Another helpful feature is called “Sleep Timer.” This allows you to program the remote to turn off your TV after a certain amount of time has passed. To use this feature, first find your device’s code in the RCA database as described above. Then, press and hold down both the “Setup” button and your device’s code number until the LED light on the remote blinks twice. Enter 9-9-3 followed by your desired sleep time in hours (up to 11 hours).

The RCA universal remote also has a “Mute” button to mute your TV’s audio and a “Pause” button. You can also set up the remote to automatically mute the volume when you turn on the TV by holding down both the “Setup” button and 9-9-2 until the light blinks twice, then pressing and holding down both the “Setup” button and 9-9-0.

If you want to control a second device with your RCA universal remote, such as a DVD player or cable box, you can use what is called an “Auxiliary Key.” To set this up, press and hold down both the “Setup” button and 9-9-4 until the light blinks twice. Then, press and hold down both the “Setup” button and your desired auxiliary key (1 for Auxiliary 1 or 2 for Auxiliary 2). Enter your device’s code number using the method described above. Pressing either of these keys will now turn on/off your second device just like it turns on/off your tv.

Troubleshooting Tips

If your RCA remote is not working, there are a few things you can try to troubleshoot the issue.

First, check that the batteries in the remote are fresh and inserted correctly. If the batteries are low, they may not have enough power to operate the remote properly.

Next, make sure that you are pointing the remote directly at the TV or other device you’re trying to control. The remote needs to be within range of the device in order for it to work properly.

If you’re still having trouble, try resetting the remote by pressing and holding the “Setup” button for 3 seconds. This will clear any stored codes and allow you to start from scratch.

If none of these tips solve your problem, there may be an issue with the remote itself and you’ll need to replace it.


In this article, we have shown you how to Program RCA Universal Remote Without Code. We hope that this information has been helpful and that you are now able to use your remote control without any issues. It’s a relatively simple process that only requires a few minutes of your time.

Once you’ve programmed your remote, you’ll be able to use it to control any compatible device in your home. Give it a try and see how easy it is to get started! If you have any further questions or concerns, please do not hesitate to contact us.


How do I reset my RCA remote?

To reset the remote’s microprocessor, remove the batteries and then press and hold the number 1 key for a few seconds. Reinstall the batteries, push the ON/OFF key, and then release the number 1 key. If it comes on, try again after reprogramming the remote.

How do I program my RCA universal remote to my TV?

Hold down the remote’s Code Search button while pressing it. Press the universal remote’s key that corresponds to the device you’re connecting while maintaining control of the Code Search Button (for example, if it’s a nice new smart TV, press the TV key). The remote’s light will flicker once before remaining stable.


Please enter your comment!
Please enter your name here