Do you have a Symphonic TV and need to program your remote control to control it? Here is a detailed, step-by-step article that will show you how.
How to program a universal remote to your Symphonic TV is a question that we’ve been asked many times in our years of supporting TVs, both by customers and friends. There are three ways to program a universal remote control with your Symphonic TV, this article will explain the difference between the three methods and which one is best for you.
How To Program A Universal Remote To A Symphonic TV?
Assuming you have your Symphonic TV and universal remote, you’re just a few steps away from consolidating your living room’s many remote controls into one. Here are three methods to program your universal remote to work with your Symphonic TV:
How To Program A Universal Remote To A Symphonic TV Without Codes
In the auto search method, all the universal remote codes are gone through the scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. This might take some time, but it’s usually the quickest way to find a working code.
- First of all, turn ON your Symphonic TV.
- Turn On the universal remote and tap on the device button (TV) and OK/SEL buttons for 3 seconds.
- The LED light will blink, which means the device is ready.
- Point your remote to the TV and click on CH+ & CH- switches. The Remote will show ON/OFF signals.
- Now press up and down buttons continuously until your TV will turn Off.
- Now verify the code by tapping Power button. TV should turn ON. Try changing channels to check if the remote has been programmed correctly.
- Lastly, tap the Device button to save the code. The LED light will blink twice to confirm the code stored.
Click Here to Learn the Programming Processes of other remotes
How to Program Symphonic TV Universal Remote With Manual Method
To program a universal remote with Symphonic TV, you’ll need the key code for your TV. The key code is a four-digit code that identifies the make and model of your equipment.
To find the keycode for your TV, look in the manual that came with your TV or visit the link HERE. We have provided all the Symphonic Tv Universal Remote Codes on it. Once you have the keycode, follow these steps to program your universal remote:
- Turn on your TV and universal remote.
- Press and hold the “Setup” button on your universal remote until the button blinks twice.
- Enter the four digit keycode for your TV. The button will blink twice again.
- Point the remote at your Symphonic TV and press the “Power” button. The TV should turn off. If it doesn’t, repeat steps 2-4 using a different keycode until you find one that works.
- To save the code, press and hold the “Setup” button until it blinks twice again then press “Power.”
- You can now use your universal remote to control your Symphonic TV!
How to Program Symphonic TV Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time, you can force your universal remote into search mode to find the correct one. The code is usually located in the manual, and forcing the remote into search mode will allow it to scan through all of the codes until it finds the one that works for your device.
- Turn on your Symphonic TV.
- Press and hold the “Setup” button on your universal remote until the button blinks twice.
- Enter the code 991 into your remote. The button should blink twice again.
- Press and release the “Power” button on your remote.
- Point the remote at your Symphonic TV and press and hold the “Channel Up” button until your TV turns off. Release the button and press it again once, then release it a second time (this is known as a double-press).
- Your Symphonic TV is now programmed to work with your universal remote!
Conclusion
If you’ve been struggling to program your Symphonic TV with a universal remote, these step-by-step instructions should help. With a little patience and some trial and error, you should be able to get your remote working with your TV in no time.
Once you’ve done it, you’ll be able to enjoy the convenience of using one remote for all your devices. If you have any questions or need any help along the way, feel free to reach out to our team of experts for assistance.
