GPX DVD Player Universal Remote Codes


Hey, I hope you are doing well. Are you searching for GPX DVD Player Universal Remote Codes? Do you want to know how to program your  GPX DVD Player Universal Remote Codes for your device?

The majority of GPX DVD player owners struggle to obtain the perfect GPX universal remote control codes that will work with their devices. However, following the methods listed below makes it simple to find them, and we also included some top codes that can be programmed into any universal remote control for a gpx DVD player. Please see them below.

The following remote codes must be used if you want to program your universal remote control to a GPX DVD player.

GPX DVD Player Universal Remote 3 Digit Codes

  • 826
  • 704
  • 098

GPX DVD Player Universal Remote 4 Digit Codes

  • 0944
  • 2114
  • 0936
  • 2390

GPX DVD Player Universal Remote 5 Digit Codes

  • 22164
  • 51304
  • 20769
  • 54908
  • 22235
  • 20699

How to Program GPX DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

  • “Turn on” the smart device you wish to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches.
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. The system should start up. If it does, check a different channel to ensure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program GPX DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your equipment.

  • You must “Turn The Device On” first.
  • Press the “GPX DVD universal remote” to “TV” mode.
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have collected from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can let go of the “Power Button”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table

How to Program GPX DVD Universal Remote With Code Search

You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”
  • Press down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take some more time using the above method, but it is essential. Your remote should function properly for all in-room functions once you have completed the above steps.


We hope that our post about GPX DVD remote codes will be helpful to you as you set up your remote. Please share your thoughts and experiences regarding our website. This will enable us to better serve you and improve the functionality of the website. If you find an additional universal remote code that is not included here, you can also contact us via comments.


Can I use my phone as a universal remote for a DVD player?

Download a TV remote app like AnyMote Smart IR Remote if your phone has an IR blaster. In addition to controlling your TV, it can also operate set-top boxes, DVD and Blu-ray players, stereo equipment, and even some air conditioners.

Can you program a universal remote to a TV and DVD player?

How to use a universal remote with a television, DVD player, or Blu-ray player Activate the device. Press the appropriate device button on the remote control, either “TV,” “DVD,” or “AUX.” Hold down the “RCU SETUP” button while waiting for the device key to flash twice.


Please enter your comment!
Please enter your name here