GE TV/DVD Combos Universal Remote Code List


Hello, Have a nice day. It’s difficult to manage all the remote controls. As a result, all devices can currently be controlled effectively by the universal remote. So it’s time to try it out and watch your favorite shows. You only need to program the codes on your universal remote and follow to the entire approach; for more information on the ge ultrapro universal remote codes see this. Let’s prepare for the whole list of active codes. After that, enjoy your streaming on your GE TV/DVD combo.

GE TV/DVD Combos Universal Remote Code List

The first code is for the TV, and the second is for the DVD when the code is specified as [code1 code2]. If not, a single code is used to control both the DVD and the TV.

TV/DVD ComboGE Remote Code (V1)
AKAI1105 [1139 1113]
APEX[0214 0401]
AUDIOVOX1117 [1165 0921] [1164 1390]
AXION[0177 0921]
COBY1091 1124
CHANGHONG[0214 0401]
CLASSIC[0214 0401]
DAEWOO[0140 0444]
DIAMOND VISION[0210 0948] [0092 0896]
DURABRAND[0153 0405]
ILO1070 [1139 1113]
INITIAL1070 1085 1109
INSIGNIA0456 1406 1407 1408 [0029 0905] [1171 1413]
KONKA0412 0413
LASONIC[0210 0948]
LIQUIDVIDEO[0177 0921]
PANASONIC0437 0950
PHILIPS0456 [0189 0458]
SHARP[0079 0397]
SOVA[1003 1095]
SYLVANIA0456 [0189 0458]
TOSHIBA0394 0924

How to Program GE Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

  • “Turn on” the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-“ switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is programmed properly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

Read Also: jvc dvd player universal remote codes

How to Program GE Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your equipment.

  • You must “Turn The Device On”.
  • Click “TV” on your “GE universal remote”
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button”.

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take longer using the above method, but it is essential. Your remote should function properly for all in-room functions once you have completed all of the previous steps.

Now that you have finished the procedure for the universal remote codes, nothing is left to do. The codes can then be simply programmed. Now, controlling your devices is simple.


The GE universal remote codes and a guide on how to use them have both been made available.

You can easily operate your TV, sound bar, theatre room, Blu-ray player, and many other electronic gadgets with the GE universal remote control. We believe our readers will find this information valuable as a result of what we’ve learned thus far. Any queries you may have in the comments are welcome.


What are GE universal remote codes?

The different devices you want to use your GE universal remote to control are identified by a sequence of numbers called GE universal remote codes. These codes enable your remote to interact with your device and send commands, such as channel switching, volume up/down, and power on/off.

What if I can’t find the GE universal remote code for my device?

If the GE universal remote code for your device is not visible, you might be able to find it using the code search feature on your remote. You can try contacting GE customer service for help if it doesn’t help.




Please enter your comment!
Please enter your name here