GE DVR/DVD Combos Universal Remote Codes

Looking for the universal remote codes for the GE DVR/DVD Combos? Relax now; I’m going to provide a list of authentic GE DVR/DVD Combos universal remote codes so you may operate many devices with a single remote, including your music system, set-top box, DVD player, VCR, and more. If you’re looking for GE universal remote cl3 codes, then you’re in the right place. Why utilize numerous remotes when one would do for everyone? Let’s find out by using some easy-to-understand methods.

GE DVR/DVD Combos Universal Remote Codes List

DVR/DVD Combo	Code
HUMAX	6187
ILO	6221
LITEON	6221
JVC	6178
MEDION	6221
PANASONIC	6113
PIONEER	6184 6236
POLAROID	6303
SONY	6244 6245 6246
TIVO	6187 6184
TOSHIBA	6232 6295

How to Program GE Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

• Turn on the smart device you want to use the universal remote to control, such as the TV.
• To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
• Use the remote to choose the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Press the “up” or “down” key until the device turns off.
• Click the “power” key to confirm the code. The system should start up. If it does, check a different channel to make sure the remote is programmed properly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

Read Also: apex dvd player universal remote codes

How to Program GE Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also identifies your device’s make and model.

• You must “Turn The Device On”.
• Click “TV” on your “GE universal remote”.
• As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
• Finally, input the “Keycode” that you have received from the Instructions Booklet for programming.
• Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
• When the screen switches off you can release of the “Power Button”.

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

How to Program GE Universal Remote With Code Search

• You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.
• “Turn The Device On” first.
• Hold down the “Setup” button for a moment.
• Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above-mentioned method, but it is essential. Your remote should function properly for all in-room functions once you have completed the previous steps.

Conclusion

Now you can use a single remote to control all of your remote-controlled devices by using these GE DVR/DVD Combos Universal Remote Codes. I hope that this extensive guide was useful to you; thanks for reading!

FAQs

Reference: https://www.eliztech.com/remotes/ge-4digit-v2-combo-codes.