Hey there! Hope you are doing well. If you have a cable box device and would you want to use a universal remote control to run your devices, then why wait? We have the most recent working codes that you may type in your device using the remote control. These codes are simple to use and work with all universal remote devices. They perform perfectly.
The best ways to enter the sat universal remote codes have also been highlighted. If you are unsure of how to enter the code, therefore, check them once.
- Cable Box And SAT Universal Remote Codes List
- How To Program Cable Box & SAT Universal Remote?
- How to Program Cable Box & SAT Universal Remote Without Codes
- How to Program Cable Box And SAT Universal Remote With Manual Method
- How to Program Cable Box And SAT Universal Remote With Code Search
- Conclusion
- FAQs
Cable Box And SAT Universal Remote Codes List
| Brand Name | Cable Box Codes |
| ADELPHIA | 0512, 0511 |
| ALLEGRO | 0524, 0525 |
| AMERICAST | 0527 |
| ANTRONIX | 0468, 0469 |
| ARCHER | 0468, 0469, 0470, 0471 |
| AT&T | 0511 |
| BELL SOUTH | 0527 |
| CABLETENNA | 0468 |
| CABLEVIEW | 0468 |
| CABLEVISION | 0506 |
| CENTURY | 0471 |
| CITIZEN | 0471 |
| COGECO | 0511 |
| COLOR VOICE | 0472, 0473 |
| COMCAST | 0511 |
| COMTRONICS | 0474, 0475 |
| CONTEC | 0476 |
| COX | 0471 |
| DIGITAL MUSIC EXPRESS | 0514 |
| EASTERN | 0477 |
| EVERQUEST | 0474 |
| GARRARD | 0471 |
| GC ELECTRONICS | 0469 |
| GEMINI | 0536, 0479 |
| GE | 0549 |
| GENERAL INSTRUMENT | 0509, 0461, 0465 |
| HAMLIN | 0461, 0480, 0481, 0482 |
| HITACHI | 0463 |
| ILLICO | 0506 |
| JASCO | 0471 |
| JERROLD | 0509, 0461, 0465, 0518 |
| MAGNAVOX | 0485 |
| MEMOREX | 0486 |
| MOTOROLA (COX) | 0509, 0465, 0513, 0518 |
| MOVIE TIME | 0487 |
| NSC | 0487 |
| OAK | 0476, 0489 |
| PACE | 0532 |
| PANASONIC | 0460, 0508 |
| PARAGON | 0486, 0488 |
| PHILIPS | 0471, 0479, 0485, 0490, 0491, 0492 |
| PHILIPS MAGNAVOX | 0505, 0534 |
| PIONEER | 0478, 0506, 0493, 0494 |
| PULSAR | 0486 |
| RADIO SHACK | 0505, 0534, 0525 |
| RCA | 0460, 0471, 0507 |
| REALISTIC | 0469 |
| REGAL | 0482 |
| REGENCY | 0477 |
| REMBRANDT | 0463 |
| ROGERS | 0506 |
| RUNCO | 0486 |
| SAMSUNG | 0474, 0494 |
| SCIENTIFIC ATLANTA | 0498, 0497, 0506, 0535, 0512, 0466, 0496 |
| SHAW | 0511 |
| SIGNAL | 0474 |
| SIGNATURE | 0463 |
| SL MARX | 0474 |
| SPRUCER | 0460 |
| STANDARD | 0499 |
| STARCOM | 0461, 0518 |
| STARGATE | 0474 |
| STAR SIGHT | 0507 |
| STAR TRAK | 0516 |
| TANDY | 0500 |
| TELEVIEW | 0474 |
| TEXSCAN | 0499 |
| TIME WARNER | 0506 |
| TOCOM | 0464, 0501, 0513, 0520 |
| TOSHIBA | 0486 |
| TV86 | 0487 |
| UNIKA | 0468, 0469, 0471 |
| UNITED | 0461 |
| UNIVERSAL | 0468, 0469, 0470, 0471, 0502, 0524 |
| VIDEOWAY | 0504 |
| VIEWSTAR | 0475, 0485, 0487, 0500 |
| VIDEO TECH | 0550 |
| VIDEOTRON | 0506 |
| ZENITH | 0503, 0525, 0471, 0486, 0521, 0522, 0523, 0527 |
How To Program Cable Box & SAT Universal Remote?
A universal remote can be set up or configured in three easy ways:
- Using a keycode
- Programming using a universal remote code search
- Manual setup
How to Program Cable Box & SAT Universal Remote Without Codes
All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:
- Turn on the smart device you want to use the universal remote to control, such as the TV.
- To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
- Use the remote to select the “CH+” and “CH-“ switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
- Click the “power” key to confirm the code. The system should start up. If it does, try a different channel to ensure the remote is configured properly.
To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.
Read Also: jvc-dvd-player-universal-remote-codes/
How to Program Cable Box And SAT Universal Remote With Manual Method
The universal remote may be readily programmed using the keycode, which also helps to identify the make and model of your device.
You must “Turn The Device On” first.
- Press the “TV” button on your “Cable Box & SAT universal remote”
- As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
- Finally, enter the “Keycode” that you received from the Instructions Booklet for programming.
- Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
- When the screen switches off you can release the “Power Button”.
That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.
How to Program Cable Box And SAT Universal Remote With Code Search
You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.
- “Turn The Device On”.
- Hold down the “Setup” button for a moment.
- Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”
Finding your key code may take some more time using the above method, but it is very crucial. Your remote should function properly for all in-room functions once you have completed the previously mentioned steps.
Conclusion
Now that the article is over, I hope you can effectively control your Cable Box And SAT Universal Remote Codes. And I have no doubt that you will be able to do anything.
FAQs
Can you program a universal remote to a cable box?
Your cable boxes may be configured with a universal remote control for smooth operation and functionality. In actuality, using the universal remote control with your cable box just requires adding a few particular codes
Can any remote be used with a cable box?
The majority of universal remote controls can operate numerous devices, including your TV, cable box, and other additional devices like a DVD player and a streaming device.
